Identifying Parts And Controls (Base Station) - Sony LocationFree LF-PK1 Operating Instructions Manual

Identifying Parts and Controls
Front
Rear

Identifying Parts and Controls (Base Station)

1 WIRELESS LED
Indicates the wireless function status.
Green: Connected with the LocationFree device on the 2.4 GHz
channel.
Turns green momentarily, then turns off for 3 seconds: Wireless is
enabled, but wireless communication with a LocationFree
device is not taking place.
2 NETWORK LED
1
Indicates the connection status to an external network, such as the
2 Internet.
Green slow blinking: Attempting to connect.
3
Green: Connected to the network. The LED blinks quickly when
data is transmitted.
4
Off: Not connected.
3 NETAV LED
Indicates the connection status with the LocationFree device.
5
Green fast blinking: NetAV authentication has failed.
Green slow blinking: Attempting to connect with NetAV.
6
Green: Connected with NetAV.
Amber blinking: Updating Dynamic DNS.
Amber: Dynamic DNS failure.
Off: Not connected.
Red: The Base Station is being initialized.
4 SETUP MODE LED (1 page 11)
Amber: The Base Station is in Setup mode.
Amber blinking: Easy registration is possible.
5 POWER LED (1 page 12)
Green: The power is on.
Red blinking: A malfunction has occurred.
6 POWER button (1 page 12)
Turns the Base Station power on and off.
7 LAN port
Connect a LAN cable.
8 BASE STATION RESET button (1 page 48)
Initializes all settings on the Base Station to the factory defaults.
9 SETUP MODE button (1 page 11)
Press to register LocationFree devices, or to make Base Station
settings.
0 IN 2 (AUDIO/VIDEO) terminal (1 page 8)
Connect the scart to A/V cable (supplied) or the A/V cable (RCA
pin cable, supplied).
qa DC IN jack (1 page 12)
Connect the AC power adapter (supplied).
qs IN 1 (AUDIO/VIDEO) terminal (1 page 8)
Connect the scart to A/V cable (supplied) or the A/V cable (RCA
pin cable, supplied).
qd IR BLASTER port (1 page 9)
Connect the IR Blaster (supplied).
5
(Base Station)