Adjusting the Video
You can adjust the streaming rate according to the
bandwidth available on your communications
connection. This allows you to watch video with
the optimum quality.
Normally, selecting [Auto] sets the optimal video
rate in accordance with available bandwidth.
When selecting a rate manually, note that a higher
rate results in higher picture quality, but a higher
(larger number) rate requires a larger bandwidth
and video will tend to keep stopping and starting
if there is insufficient bandwidth for the higher
Click [Rate] at the bottom of the window.
The [Change Rate] window appears.
Click a rate, and then click [OK].
When you switch between [Auto] and [Manual],
change the rate from  or  to another rate, or
change from another rate to  or  while
connected, the NetAV connection may be
disconnected and then reconnected automatically
in some cases.