Enter the WEP key printed on the sticker of
the Base Station and then click [Connect].
Display Video on your
Before you register your computer with the Base
Station and display video on the computer, you
need to install LocationFree Player on the
computer (1 page 32).
With the Base Station powered on, press the
[SETUP MODE] button on the rear panel of
the Base Station. Keep pressing until the
SETUP MODE LED starts blinking.
The SETUP MODE LED blinks.
When using a router to connect to the Base
Station, it takes a while for the IP address to be
assigned to the Base Station by DHCP. The Base
Station does not appear in the window shown in
Step 2 until the IP address has been assigned.
Proceed to Step 2 after the NETWORK LED