Setup to Watch Video at Home
This section describes the setup for using NetAV to watch video at home.
Turn on the Base Station
Connect the Mains Lead to the Base
Connect the mains lead after you finish making
all other connections.
Base Station rear panel
AC-LX1B AC power
Connect the mains lead to the Base
Station AC power adapter (AC-LX1B),
and the AC power adapter to the DC IN
jack on the Base Station, then plug the
mains lead into a mains socket.
Use only the supplied AC power adapter
To DC IN
Mains lead (Type BF)
Mains lead (Type C-6)
Turn on the Base Station Power
Press the POWER button on the front panel of the
Base Station to turn it on.
The POWER LED on the front panel of the
Base Station lights green.