Eagle FishEasy 240 Portable Installation And Operation Instructions Manual page 46

allow the bracket to extend below the hull, because water pressure
against it can cause the suction cup to come off at speed.
Moisten the cup, then press it onto the hull as firmly as possible. Tie
the nylon cord to the boat and route the transducer cable to the sonar
unit. Your portable sonar is now ready for use.
Suction
Bracket
cup
Hull
Transducer
Portable transducer installed on boat transom.
NOTE:
For optimum operation, the portable transducer should be adjusted so
that it is parallel to the ground. For more information on this, see the
earlier segment on Transducer Orientation and Fish Arches.
For more detailed instructions on installing the FishEasy 240 Portable
unit, please refer to the PPP-12 Porta Power Pack instruction sheet
packed with your unit. These instructions are also available for
download from the Eagle web site (www.eaglesonar.com).
40