Alarms; Fish Alarm; Depth Alarms - Eagle FishEasy 240 Portable Installation And Operation Instructions Manual

Alarms

The sonar unit has two different types of alarms, fish and depth.

Fish Alarm

The Fish Alarm sounds a tone when a fish symbol appears on the
screen. The default setting is on, but the Fish I.D. feature must be
turned on for fish alarms to work.
To turn Fish I.D. on, press until the menu appears. Press
MENU F ID
ISH
to select , then press .
UP ARROW O PWR
N
To turn off the fish alarm without turning off fish symbols, press
MENU
until appears. Press to select , then
DOWN F A DOWN ARROW O
ISH LARM FF
press to clear the menu. Repeat the above steps to turn the alarm
PWR
back on, but press to select before clearing the menu.
UP ARROW O
N
Fish Alarm menu.

Depth Alarms

The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shal-
low and a deep alarm. The shallow alarm sounds an alarm tone when
the bottom goes shallower than the alarm's setting. The deep alarm
sounds a tone when the bottom goes deeper than its setting. Both
alarms adjust the same way, although through different menus.
63