Listening Through A Receiver - Samsung T27B750ND User Manual

Advanced Features
Setting up Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
•
To use the Anynet+ Function,
✎
When the Anynet+ (HDMI-CEC)
• Auto Turn Off
Set an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If the Auto Turn Off
✎
May not be enabled depending on the device.
Receiver
•
You can listen to sound through a receiver (i.e. Home Theater) instead of the product Speaker.
Switching between Anynet+ Devices
1. Open the Tools menu using your remote, and then select
2. Select Device List. The
✎
If you cannot find a device you want, select
3. Select a device, and then wait until switch to the selected device.
✎
The Device List menu appears only when you set
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
switching is in progress.
✎
If you have selected an Anynet+ device using
use the Anynet+ function. Make sure to switch to an Anynet+ device by using the

Listening through a Receiver

You can listen to sound through a receiver (i.e. Home Theater) instead of the product Speaker. To listen to sound through
a receiver, go to Receiver screen
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) port of the product.
✎
When the receiver (i.e. Home Theater) is set to On, you can hear sound output from the product's Optical jack.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you
will hear only 2 channel sound from the receiver.
Anynet+ (HDMI-CEC)
function is disabled, all the Anynet+ related operations are deactivated
is set to Yes, running external devices will turn off at the same time as the TV powers off.
Device List screen appears.
Refresh
(System → Anynet+ (HDMI-CEC)
English - 134
must be set to On.
Anynet+ (HDMI-CEC).
to refresh the list.
Anynet+ (HDMI-CEC)
Source function and then selecting its input source, you cannot
→ Receiver). Then select
to On in the System menu.
Device List.
Receiver and set to On.