Memorizing Channels; Auto Program - Samsung T27B750ND User Manual

Basic Features for the TV
Antenna
→ →
Menu Channel Antenna
Before your product can memorize the available channels, you must select your TV's signal source,
antenna) or Cable. Select Air
✎
Selecting the signal source using the
to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must
select Air to see a picture.

Auto Program

Menu → Channel → Auto Program
The Auto Program function memorizes all channels that are available over the air or through your cable system and adds
them to the Channel list.
To start the Auto Program, follow these steps:
1. Go to the Auto Program
2. Select Air or Cable
✎
If you selected
3. If you selected the Cable, the cable system screen appears. Select the
✎
If you selected the
4. Select the correct cable signal format - STD,
✎
Most cable systems use
5. Repeat for Analog Cable
6. Select Next. The Auto Program
✎
After all the available channels are stored, the
the Auto Program

Memorizing Channels

or Cable. After you have selected the signal source, go on to the
Antenna function also determines the signal source the product is tuned
menu.
or both, and then select Next. A
Air or Cable in the Antenna
Air only, the Auto Program
HRC
STD (Standard).
System.
starts.
menu then reappears. This process can take up to 30 minutes.
English - 49
mark appears in the check box.
c
menu, your choice will already be selected.
Digital Cable
starts.
or IRC.
Auto Program removes scrambled channels. When done,
Air (using an
Auto Program function.
System.