Getting Started
Connecting the Power Cord and the Antenna or Cable Connection
VHF/UHF Antenna
Cable
ANT OUT
✎
Plug the power cord into a wall outlet only after you have made all other connections.
✎
If you are connecting your product to a cable or satellite box using HDMI, Component, or Composite connections,
you do not need to connect the ANT IN jack to an antenna or a cable connection.
✎
Connect the power adapter to DC 14V on the rear of the product. Connect the power cord to the adapter and wall
socket. (The input voltage is switched automatically.)
✎
Use caution when you move or swivel the product if the antenna cable is tightly connected. You could break the
antenna jack off the product.
Antenna Cable (Not Supplied)
or
English - 20
Power Input