Advanced Features
Switching between Anynet+ Devices
1. Open the
Tools
menu using your remote, and then select
2. Select
Device
List. The
✎
If you cannot find a device you want, select
3. Select a device, and then wait until the switch to the selected device is completed.
✎
The
Device List
menu appears only when you set
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
switching is in progress.
✎
If you have selected an Anynet+ device using the
Make sure to switch to an Anynet+ device using the
Listening through a Receiver
You can listen to sound through a receiver (i.e. Home Theatre) instead of the product Speaker. To listen to sound through
a receiver, go to
Receiver
screen
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL
AUDIO OUT (OPTICAL) port of the product.
✎
When the receiver (i.e. Home Theatre) is set to on, you can hear sound output from the product's Optical jack.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI,
you will hear only 2 channel sounds from the receiver.
Using the ARC function
You can listen to sound from the product through a receiver connected using an HDMI cable without connecting a
separate optical cable. To listen to sound through a receiver using the ARC function, go to
Anynet+ (HDMI-CEC)
→ Receiver). Then select
✎
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the
HDMI IN 2 (MHL / ARC) port.
✎
To disable the ARC function, set the
the receiver will be blocked from receiving the signal.
Device List
screen appears.
Refresh
→
(System
Anynet+ (HDMI-CEC)
Receiver
Receiver
to Off. Even if the product transmits the ARC signal continuously,
English - 163
Anynet+
(HDMI-CEC).
to refresh the list.
Anynet+ (HDMI-CEC)
to
Source
function , you cannot use the Anynet+ function.
Device List
function.
→ Receiver). Then select
and set to On.
On
in the
System
menu.
Receiver
and set to On.
Receiver
screen
(System
→