Network Features
Wi-Fi Direct
→
→
Menu
Network
Wi-Fi Direct
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with
your product directly without a router.
✎
To use this function, your mobile device should be supported by the
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1. Go to
Wi-Fi Direct
2. Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
–
PBC: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically
acquires all the network setting values it needs and connects to your network.
–
PIN: Input the displayed PIN on your device.
✎
If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect.
Soft AP
Menu
→
Network
→
Soft AP
Using this function, you can connect the product on your mobile devices if your mobile devices do not support
Direct. Set the options for connection of Wi-Fi device.
•
Soft AP
Turns on or off the
Soft
connection list.
•
Security key
Set the
Security key
manually using the remote control.
–
If the security key does not meet the required digit number,
–
Input the generated security key into the device you want to connect.
–
If network does not operate normally, check the security key again. An incorrect security key may cause a
malfunction.
Managing the Network Connected Devices
screen
(Network
→
Wi-Fi
Direct). The product starts to search devices.
AP. When
Soft AP
is set to On, your mobile devices can find the product name in Wi-Fi
Wi-Fi
Done
is not available.
English - 71
Direct.
Wi-Fi