Introduction; Specifications - Eagle Fish ID 128 Installation And Operation Instructions Manual

INTRODUCTION

Thank you for purchasing an Eagle sonar. Your Fish ID 128 is a high quality
sonar designed for both professional and novice fishermen. This unit has
an automatic feature that finds and displays the bottom, fish, structure, and
more! All you have to do is press the on key. However, if you wish to fine
tune the unit, simply press a menu key. This unit has powerful features
available through easy-to-use menus.
To get started with your Eagle sonar, first read the installation section. This
is where it all begins. Improper installation can cause problems down the
road. After you've read the instructions, install the unit, then read the rest
of the manual. The more you know about your unit, the better it will perform
for you. Take this manual for reference when you head for the water.

SPECIFICATIONS

Dimensions ...................... 5.9" W x 5.35" H x 3.4" D
Input Voltage .................... 10 - 15 vDC
Current Drain ................... 150 ma (lights off)
Transmitter
Display ........................... 128 pixels (H) x 64 pixels (W)
The storage temperature for your unit is from -4 degrees to +167 degrees
Fahrenheit (-20 degrees to +75 degrees Celcius). Extended storage in tempera-
tures higher or lower than specified will damage the liquid crystal display in your
unit. This type of damage is not covered by the warranty. For more information,
contact the factory customer service department or your local service center.
........................... 250 ma (lights on)
Frequency .......... 192 kHz
Output Power ..... 275 watts (peak-to-peak)
........................... 37.5 watts (RMS)
........................... Supertwist Liquid Crystal Display
5.9"
NOTICE!
3
3.4"