Chart Speed; Display Mode - Eagle Fish ID 128 Installation And Operation Instructions Manual

CHART SPEED

The rate echoes scroll across the screen is
called the chart speed. It's adjustable by
pressing a menu key until the chart speed
menu appears. Chart speed is set to maxi-
mum when the unit is first turned on. To
decrease it, press the down arrow key. Press
the up arrow key to increase the speed again.
The percentage of chart speed also shows on
this menu. Echoes scrolling onto the screen
will also show the effects of the change. If you
reach the maximum or minimum level, an
warning tone sounds.
CHART STOP
To stop the chart, first clear any menu from the screen by pressing the
PWR/CLEAR key. You can't stop the chart while a menu is displayed. Now
press the up arrow key. The chart will freeze and the word "STOP" appears
at the top right portion of the screen. To start the chart, press the up arrow
key again or the PWR/CLEAR key.

DISPLAY MODE

This sonar has two different screen modes -
Chart 1, (shown at right) which is the normal
mode and Chart 2 which is the FasTrak
mode. To change modes, press the MENU
key until the "DISP MODE" (Display Mode)
menu appears. Then press the up or down
arrow keys to change it.
CHT 2 (Chart #2)
This is the FasTrak mode. It has the following
features:
1. Automatic Off
2. Fish ID Feature Off
3. Digital Depth Display Off
19