Switching The System On; Adjusting Volume And Sound - Philips MCM196D/37B User Manual

M I C R O S Y S T E M M C M 1 9 6 D
IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
Press STANDBY ON or SOURCE (or 2on
the remote control).
➜
The system will switch to the last selected
source.
●
Press CD, iPod, TUNER, TAPE or AUX on
the remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY ON on the system (or 2on
the remote control).
●
If in tape mode or recording mode, press
STOP•OPENÇ0 first.
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
To switch the system to Eco-power
standby mode
● Press and hold STANDBY ON (y on the
remote control) for more than 2 seconds.
➜ The display will go blank.
Power-saving automatic standby
The power-saving feature automatically switches
to Eco power standby 15 minutes after a CD
playback has ended and no control is operated.
Basic Functions

Adjusting volume and sound

1
Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOL -/+ on the remote
control).
➜ Display shows the volume level VOL and a
number from 0-32.
2
Press DSC repeatedly to select the desired
sound effect: JAZZ / POP / CLASSIC / ROCK.
3
Press DBB to switch bass enhancement on or
off.
➜
Display shows:
4
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜
Playback will continue
without sound.
●
To activate sound
reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
if the DBB is activated.
15