Basic Functions
Switching the system on
●
Press STANDBY ON or SOURCE
(or 2on the remote control).
➜
The system will switch to the last selected
source.
●
Press CD, TUNER or TAPE on the remote
control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY ON on the system (or 2on
the remote control).
●
If in tape mode or recording mode, press
STOP•OPENÇ0 first.
➜
The volume level (up to a maximum volume
level of 20), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a tape or CD
playback has ended and no control is operated.
Adjusting volume and sound
1
Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOL -/+ on the remote
control).
➜
Display shows the volume level VOL and a
number from 0-32.
2
Press DSC repeatedly to select the desired
sound effect: JAZZ / POP / CLASSIC / ROCK.
3
Press DBB to switch bass enhancement on or
off.
➜
Display shows:
4
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
if the DBB is activated.
9