Table of Contents
Advertisement
M I C R O S Y S T E M M C M 1 9 6 D
Setting the clock
1
In standby mode, press and hold DISPLAY/
CLOCK (DISPLAY/CLOCK/MENU on the
remote control) for 2 seconds.
➜
The clock digits for the hours flash.
2
Press TUNING 4 ¢ to set the hours.
3
Press DISPLAY/CLOCK again.
➜
The clock digits for the minutes flash.
4
Press TUNING 4 ¢ to set the minutes.
5
Press DISPLAY/CLOCK to confirm the time.
Note:
– The backlight for clock display is off in standby.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD, TUNER or iPod is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
1
In standby or active mode, press and hold
SLEEP/TIMER on the remote control.
2
Press SOURCE (CD, iPod or TUNER on the
remote control) to select sound source.
3
Press SLEEP/TIMER to confirm your desired
mode.
➜
The clock digits for the hours flash.
4
Press TUNING 4 ¢ to set the hours.
5
Press SLEEP/TIMER again.
➜
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ to set the minutes.
7
Press SLEEP/TIMER to confirm the time.
➜
The timer is now set and activated.
●
To deactivate timer, in timer setting mode,
press 9.
➜
disappears from the display.
Activating and deactivating
SLEEP
The sleep timer enables the
system to switch off by itself
after a set period of time.
●
Press SLEEP/TIMER on the
remote control once or more.
➜
Display shows
of the sleep time options in sequence: 60, 45,
30,15, 0, 60... if you have selected a time.
●
To deactivate, press SLEEP/TIMER on the
remote control once or more until " 0" is shown,
or press STANDBY ON
system (or 2on the remote control).
➜
disappears from the display.
Clock/Timer
and one
on the
ECO POWER
21
Advertisement
Table of Contents
