Garmin G900X Pilot's Manual page 63

6) If the profile name to be exported is the same as an existing profile file name on the SD card, the system displays
an 'Overwrite existing file? OK or CANCEL' prompt. Press the ENT Key to replace the profile on the SD card
with the profile to be exported, or turn the FMS Knob to highlight 'CANCEL' and press the ENT Key to return to
the Pilot Profile Exporting window without exporting the profile.
7) If successful, the EXPORT RESULTS window displays 'Pilot profile export succeeded.' With 'OK' highlighted,
press the ENT or CLR Keys, or press the FMS Knob to return to the AUX - System Setup Page.
DATE/TIME
The system time is displayed in the lower right corner of the PFD(s). Time and date format (local 12-hr,
local 24-hr, or UTC) are modified on the System Setup Page. Universal Coordinated Time (UTC; also called
Greenwich Mean Time (GMT) or Zulu) date and time are calculated directly from the GPS satellites signals
and cannot be changed. An offset is provided to add or subtract the desired amount of time (hours:minutes)
from UTC to define current local time.
Configuring the system time:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the 'Time Format' field.
4) Turn the small FMS Knob to select the desired format and press the ENT Key to confirm selection. The 'Time
Offset' field is highlighted (for local time formats).
5) Use the FMS Knob to enter the desired time offset (±HH:MM) and press the ENT Key to confirm selection.
190-00726-00 Rev. J
Pilot Profile Exporting Window, Enter a
Name to Use for Exported Profile
Figure 1-36 Pilot Profile Export on the AUX - System Setup Page
Garmin G900X Pilot's Guide
SYSTEM OVERVIEW
Export Successful
47