Garmin G900X Pilot's Manual page 491

t m
Raffic aP
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
RANGE Knob, as indicated by the map range rings.
Changing the display range on the Traffic Map Page:
1) Turn the RANGE Knob.
2) The following range options are available:
• 2 nm
2 and 6 nm
•
• 6 and 12 nm
• 12 and 24 nm (GTS 820 only)
• 24 and 40 nm (GTS 820 only)
ADDITIONAL TRAFFIC DISPLAYS
The Map - Traffic Map Page is the principal map page for viewing traffic information. Traffic information
can also be displayed on the following other maps for additional reference on the MFD when the traffic unit
is operating:
• Navigation Map Page
• Trip Planning Page
Traffic information can also be displayed on the PFD when the Synthetic Vision System (SVS) option is
installed and enabled. See the Additional Features Section for details.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
When traffic is selected on maps other than the Traffic Map Page, a traffic icon is shown to indicate traffic
is enabled for display (Figure 6-171).
Displaying traffic on the Navigation Map
1) Ensure the traffic system is operating. With the Navigation Map displayed, press the MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map as shown in Figure 6-171.
190-00726-00 Rev. J
P D R
age isPlay ange
Garmin G900X Pilot's Guide
HAZARD AVOIDANCE
• Nearest Pages
• Active Flight Plan Page
475