Traffic Map Page Display Range - Garmin G900X Pilot's Manual

HAZARD AVOIDANCE
Or :
1) Press the MENU Key.
2) Turn the small FMS Knob to select one of the following:
BELOW
•
• NORMAL
ABOVE
•
UNREST (unrestricted)
•
3) Press the ENT Softkey.

TRAFFIC MAP PAGE DISPLAY RANGE

The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
RANGE Knob from 2 to 24 nm, as indicated by the map range rings.
Changing the display range on the Traffic Page:
1) Turn the RANGE Knob.
2) The following range options are available:
2 nm
•
• 2 and 6 nm
• 6 and 12 nm
• 12 and 24 nm
The Navigation Map Page Setup Menu also controls the display of traffic. The setup menu controls the map
range settings. Traffic data symbols and labels can be decluttered from the display. If a map range larger than
the map range setting is selected, the data is removed from the map. Maps besides the Traffic Map Page use
settings based on those selected for the Navigation Map Page.
Customizing the traffic display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key (Figure 6-177).
4) Turn the small FMS Knob to select the Traffic Group and press the ENT Key (Figure 6-178).
5) Turn the large FMS Knob or press the ENT Key to scroll through the selections (Figure 6-179).
• TRAFFIC – Turns the display of traffic data on or off
• TRAFFIC MODE – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA/PA - Displays Traffic Advisories and Proximity Advisories
- TA ONLY - Displays Traffic Advisories only
482
Garmin G900X Pilot's Guide
190-00726-00 Rev. J