Section 3 Engine Indication System - Garmin G900X Pilot's Manual

SECTION 3 ENGINE INDICATION SYSTEM

The G900X Engine Indication System (EIS) is established based on the installed engine selected
NOTE:
during the software configuration process. Engine gauges, ranges, color bands, and caution and warning
indications are established based on the engine manufacturer's recommended guidance.
The G900X Engine Indication System (EIS) displays critical engine, electrical, fuel, and other system parameters
on the left side of the MFD during normal operations (Figure 3-1). On piston aircraft only, EIS information can
also be fully expanded to an entire page by pressing the ENGINE Softkey or turning the large FMS Knob to select
the EIS - Engine Page.
EIS Display
Green bands on the instruments indicate normal ranges of operation; yellow and red bands indicate caution
and warning, respectively. White or uncolored bands indicate areas outside of normal operation not yet in the
caution or warning ranges. When unsafe operating conditions occur, the corresponding readouts flash to indicate
cautions and warnings. If sensory data to an instrument becomes invalid or unavailable, a red "X" is displayed
across the instrument.
190-00726-00 Rev. J
Figure 3-1 MFD with EIS display (RV-10 with O-540-series)
Garmin G900X Pilot's Guide
ENGINE INDICATION SYSTEM
95