Table of Contents
Advertisement
9. Check that the new name you entered displays next to Name in
the center box, then close this dialog box.
10. Check that the printer you named appears below the Select An:
pull down menu:
Figure 3-5
Renamed Epson printer
If the printer name does not display, you have assigned the
wrong printer. Double click on the name of the printer you
mistakenly assigned. After the dialog box appears, pull down
the Commands menu in the menu bar and select Reset To
Factory Settings. Then exit that dialog box and return to step 3.
11. If you have connected more than one printer, repeat steps 3 to
10 to assign a unique name to each printer.
12. Click on Quit to exit the EpsonNamer.
Selecting a LocalTalk printer with the Chooser
The following procedures describe using the Chooser to select the
printer you have just named.
1. Select the Chooser from the Apple menu. A screen similar to the
following screen appears:
Assigning and selecting a LocalTalk printer
21
Advertisement
Table of Contents
