Table of Contents
Advertisement
Chapter 2: Installing the Interface Card for LocalTalk
The Interface Card for LocalTalk allows Macintosh-family
computers to use an Epson printer through a LocalTalk
connection. Once the interface card is installed in the printer and
the appropriate driver is installed on the computer, the printer
becomes a standard LocalTalk device that does not require special
command sequences to print documents. The Interface Card for
LocalTalk is a simple "plug and go" card, significantly reducing
installation time and expense.
The Interface Card for LocalTalk offers the following features:
Easy installation
q
No DIP switches to set
q
An additional Macintosh-compatible serial port, compatible
q
with most serial devices. In the future, this port will support
network expansion.
What is AppleTalk?
AppleTalk is the local area network protocol developed by Apple
Computer, Inc., as a standard for Macintosh computer
communication. LocalTalk provides the physical link between
devices and computers. LocalTalk hardware is built into every
Macintosh and requires the appropriate twisted pair cabling. The
AppleTalk network system was designed as a seamless extension
of the Macintosh, allowing easy access to remote resources and
interaction with other users through personal computers.
Preparing to install the interface card
The Interface Card for LocalTalk is designed for easy installation
inside the printer. Installing or removing the interface card is
simple; you'll need only a Phillips screwdriver and your printer
manual.
Advertisement
Table of Contents
