System Configuration; Localtalk Interface And Printer Cable Requirements - Epson MACLQ (EpsonTalk I/F for LQ Printers User Manual

System configuration

Your Macintosh computer must have the following minimum
system configuration to use EPSON Print!:
Memory requirements
Operating System
Storage
*EPSON Ptint! drivers must be installed on your Macintosh computer's hard
disk, but require very little storage space, so any size hard disk is supported.

LocalTalk interface and printer cable requirements

You can connect your Macintosh to your printer using an
AppleTalk connector kit or a LocalTalk compatible connector and
cable. You need one connector kit for each Macintosh and one
connector kit for each printer.
For more information about cable requirements, consult your
Macintosh documentation or the documentation provided with
the LocalTalk connector and cable.
1 MB RAM
System 6. x:
System 7.x: More than 2 MB RAM
System 6.x (6.0.5 or later) or
System 7.0
hard disk*
Do you have what you need?
5