Table of Contents
Advertisement
Chapter 5: Troubleshooting
Columns of numbers don't line up as expected when in
Draft print mode.
You may have selected a proportionally spaced font. Select a
fixed pitch font, such as Courier, for your text. See Chapter 4,
"Using the Draft print mode effectively" for the best font sizes
to select.
AppleTalk network problems
EpsonNamer does not run.
n
The Epson LocalTalk (Net) printer driver may not be installed.
Install the driver according to the instructions in Chapter 3.
Epson Tool may not be installed properly. Reinstall Epson
Tool according to the instructions in Chapter 3.
The Communication folder may not be installed properly (if
you are using System 6.x). Reinstall the Communication folder
according to the instructions in Chapter 3. (Installing the
Communication folder is not required for System 7.x.)
No printer is listed in the EpsonNamer.
n
AppleTalk may not be active. Enter the Chooser and set
AppleTalk to Active before running the EpsonNamer.
The printer may not be connected properly to your computer.
Make sure the cables and LocalTalk connection boxes are
connected properly.
The printer may not be turned on. Turn on the printer.
No printer is listed under Select an AppleTalk... in Chooser.
n
AppleTalk may not be set to Active. Set AppleTalk to active in
the Chooser.
Advertisement
Table of Contents
