Installing Epson Print! With System 7.X; Copying The Epsonprint! Driver To Your Hard Disk; Copying The Epson Print! Driver To Your Hard Disk - Epson MACLQ (EpsonTalk I/F for LQ Printers User Manual

Important
Chapter 3: Installing EPSON Print!
Once you have installed the Interface Card for LocalTalk on your
Epson printer, you can install the EPSON Print! driver your
Macintosh needs to communicate with the printer.
You'll need the following EPSON Print! disks to install your
EPSON Print! drivers.
EPSON Print! Network Package Disk
Communications Toolbox Package Disk*
q
*Used only for Macintosh computers running System 6.x.
Be sure to copy your EPSON Print! disks and store the originals in a
safe place. Use your copies to install your EPSON Print! drivers.
Refer to your Macintosh documentation for information on
copying disks.
Since the procedures for installing EPSON Print! on a Macintosh
running System 7.x are different from those for System 6.x, this
section first describes installing EPSON Print! with System 7.x,
then with System 6.x.

Installing EPSON Print! with System 7.x

These procedures describe how to install the EPSON Print!
drivers on a Macintosh running System 7.x. They cover installing
the EPSON Print! drivers, including the Epson Tool, and copying
the EpsonNamer to your Macintosh computer's hard disk.

Copying the EPSON Print! driver to your hard disk

Follow these steps to install EPSON Print! in the Extensions folder
located in the System folder on your bard disk.