Performing A Search With A Profile; Making A Profile - Epson EasyMP Network Projection Operation Manual

Connecting to a Projector on a Different Subnet
The search results are displayed on the EasyMP Network Projection
projector selection screen.
Provided the target projector has been identified, select that projector,
and then click Connect to establish a connection.
When you will always be using that projector, save the search as a
Profile, so that you do not have to specify the relevant details every
time you perform a search.

Performing a Search with a Profile

You can save a search for a frequently used projector as a Profile. A
"profile" is a file containing all of the information pertaining to a given
projector, such as the projector name, its IP address, and SSID. If you
specify that information from the next time you perform a search, there will
be no need to specify the IP address or projector name each time you
perform a search. For example, by creating a group of Profiles for each
place where a projector is setup and managing them with folders, the target
projector can be found quickly.
p.30
s
A
Building A
B
Building B
C
Building C
D
Building D
This section explains how to create and edit a Profile.

Making a Profile

Profiles are made by saving search results.
For details on how to edit a previously saved Profile, see the following
section. p.32
s
Procedure
A
While the projector is displayed on the EasyMP Network
Projection projector selection screen, click "Save in the
profile".
30
E
Floor 1
F
Floor 2
G
Floor 3