The Screen Is Not Projected; Easymp Multi Pc Projection - Epson PowerLite Pro G6050W Operation Manual

Solving Problems

The Screen is not Projected

The movie image and audio are not displayed, the image is slow to appear, or either the video or audio stop when
projecting using EasyMP Multi PC Projection
Check
Did you try to play back movies with Media Player or try to
operate the screen saver preview?
Is WEP encryption enabled?
Have you enabled DHCP?
Was EasyMP Multi PC Projection started while a movie was
playing, or were the resolution and color number
changed?
(For Mac OS X)
Are you using a computer that does not meet the
software requirements?
Is Make the movement of the mouse pointer smooth
selected?
Is Transfer layered window selected?
Depending on the computer, the movie playback screen in Media Player may not be displayed, and
the screen saver preview may not be displayed normally.
When WEP encryption is enabled, display speed decreases.
When DHCP is set to On in Advanced connection mode or wired LAN connection, if an available DHCP
server is not found, it may take a while to enter LAN standby status.
When playing back movies, start EasyMP Multi PC Projection first before starting play back. If EasyMP
Multi PC Projection is started during movie play back and the display screen resolution and color
numbers are changed, try moving the movie playback window, minimizing it, or resizing it and so on.
When using a computer that does not meet the software requirements, images and audio for movies
may stop.
s "Software Requirements" p.6
Do one of the following to stop the mouse pointer from flickering on the screen.
• Select Make the movement of the mouse pointer smooth.
s "General Settings Tab" p.44
• Clear Transfer layered window.
s "Adjust Performance Tab" p.45
Remedy
37