SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Setting Procedures for Printing
Making Settings in Windows
A
Display the printer driver's Printer Settings tab
and adjust the following settings.
"Basic Printing Methods(Windows)" on
U
page 45
B
Select Borderless in the Size Settings area.
To fit output to the roll width, choose Fit to Roll
Paper Width before selecting Borderless.
More Ways to Print
C
In the Layout tab Borderless Enlargement
Setting area, select either Auto Expand or
Retain Size.
If Auto Expand is selected, click Amount of
Enlargement and choose the amount cut off at
the edges.
Note:
Retain Size is not available when Fit to Roll Paper
Width is selected in the Printer Settings tab or
Reduce/Enlarge is selected in the Layout tab.
Max
Standard
Min
Note:
Moving the slider towards Min decreases the image
enlargement ratio. Therefore, some margins may
appear at the edges of the paper depending on the
paper and printing environment.
70
: 3 mm for left and 5 mm for right
(the image shifts 1 mm to the right)
: 3mm for left and right
: 1.5 mm for left and right