Epson SureColor SC-T3000 User Manual page 108

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
indicates factory default settings.
Item
Printer Setup Roll Paper
Setup
Using the Control Panel Menu
Description
Auto Cut On
Off
Refresh On
Margin
Off
Page Line On
Off
Roll Paper Normal
Margin
Top15mm/
Bottom15mm
Top35mm/
Bottom15mm
Top45mm/
Bottom15mm
3mm
15mm
Roll Paper On
Remaining
Off
108
Choose On to automatically cut roll paper using
the built-in cutter as each page is printed, Off to
disable auto paper cutting. The setting selected
with the printer driver takes priority when the
printer driver is used.
If On is selected during borderless printing, the
printer will automatically trim the leading edge to
remove any ink stains that may have been left by
the previous copy; to disable this feature, choose
Off.
If Auto Cut is Off, you can choose to print (On) or
not print (Off) cut lines on roll paper. Cut lines are
not printed if Auto Cut is On or when cut sheets or
poster board is used.
Note, however, that if the roll width selected with
the computer is narrower than the paper loaded in
the printer, cut lines will be printed regardless of
the option selected for Auto Cut.
The setting selected with the printer driver takes
priority when the printer driver is used.
When set to Normal, the top and bottom margins
are 15 mm, and the left and right margins are 3
mm.
Except for 15mm, the left and right margins for all
other settings are 3 mm.
"Printable area" on page 51
U
Select whether to display/record (On) or not to
display/record (Off) the amount of remaining roll
paper. The following options can be made
available by selecting On and entering the length
of the roll.
❏
Amount of roll paper remaining
When the roll is removed, a barcode will
automatically be printed on the roll stating
the length remaining, the value selected for
the roll remaining alert, and the paper type.
The barcode is automatically read and
settings adjusted the next time the paper is
used, improving efficiency when multiple
rolls of paper are used.
❏
Printing Availability
The printer will estimate printing availability
based on the length of the roll.