Epson SureColor SC-T3000 User Manual page 109

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Item
Advanced
Settings
Using the Control Panel Menu
Description
Remaining 1 to 15 m (4 to 50 ft)
Alert
Roll Paper Low
Tension
Normal
High
Extra High
Less Head On
Scuffing
Off
Drying 0 to 60 minutes
Time Per
Page
Paper Size On
Check
Off
Paper On
Skew
Off
Check
109
Displayed when On is selected for Roll Paper
Remaining.
Set within a range from 1 to 15 m (4 to 50 ft) to
display a warning when the amount of remaining
roll paper drops below that limit. You can set in
0.5m (1 ft) increments.
Select High or Extra High if the paper wrinkles
during printing.
Roll Paper Tension can be specified separately for
each paper type using the Custom Paper Setting
option in the Paper menu.
When Custom Paper is chosen for Select Paper
Type, the printer will use the value selected for
Roll Paper Tension in the Custom Paper
Setting.
This setting takes effect if no custom roll paper
tension is specified.
If the paper is thick, the print head may scuff the
print surface. Choose On to prevent scuffing. This
option can be used to temporarily change the
value selected for Custom Paper Setting > Platen
Gap in the Paper menu. Note, however, that On
has no effect when Wider is selected for Platen
Gap.
Specify how long the printer pauses to allow the
ink to dry after printing each page; choose from
values between 0 and 60 minutes. Depending on
the ink density or paper type, the ink may take a
while to dry. If the ink blurs on the paper, set a
longer time for drying the ink.
The longer the drying time, the more time required
for printing.
Choose whether the printer automatically detects
(On) or does not detect (Off) the paper width. Try
choosing Off if a paper setting error is displayed
when the paper is correctly loaded. Note, however,
that the printer may print outside the paper when
Off is selected. If it prints beyond the edges of the
paper, the inside of the printer becomes dirty with
ink. We generally recommend to operate with this
setting set to On.
If On is selected, an error will be displayed in the
control panel and printing will stop if the paper is
skewed; select Off to disable this feature. On is
recommended in most circumstances as skewed
paper may cause the printer to jam.