Paper Menu - Epson SureColor SC-T3000 User Manual

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Item
Print Job Log Sheet
* Displayed only when optional hard disk unit is installed.

Paper menu

indicates factory default settings.
Item
Load/Remove Paper
Select Photo Paper
Paper Type
Matte Paper
Plain Paper
Others
Custom Paper
Custom XXXXXXXXXXX
Paper (name of
Setting custom paper
type)
Using the Control Panel Menu
Description
Press the Z button to print the print job log.
Description
Remove Paper
Roll Paper
Cut Sheet
(up to 0.8 mm
thick)
Poster Board
Select the type of paper loaded.
Select the name of the custom paper loaded in the printer.
Select Photo Paper
Reference
Matte Paper
Paper
Plain Paper
Others
No Paper Selected
Platen Gap Narrow
Standard
Wide
Wider
Detect Paper
Press the Z button to print a pattern to determine the thickness of the
Thickness
current paper.
Select the pattern number with the least misalignment from the print
results.
105
Press the Z button to view instructions for
removing the paper. Follow the on-screen
instructions to remove the paper.
Instructions are not displayed if no paper is loaded.
Highlight the paper to be loaded and press the Z
button. Follow the on-screen instructions to load
the paper.
If paper is already loaded in the printer, the
instructions for removing the loaded paper type
will be displayed before loading instructions are
shown.
You can select the media type that is the closest to
the paper you are using.
Select this option if you do not wish to specify the
paper type.
Select the platen gap which is the distance
between the print head and the paper. Normally,
select Standard. Select a wider setting if printed
images are smeared. If, upon performing head
alignment you feel that it is still not completely
aligned, select Narrow.