Removing The Roll Paper - Epson SureColor SC-T3000 User Manual

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide

Removing the roll paper

This section describes how to remove and store roll
paper after printing. The pressure rollers may leave
impressions on paper that is left in the printer.
Buttons that are used in the following settings
A
Confirm that the printer is ready and press the
( button.
The Load/Remove Paper menu will be displayed.
B
Press the d/u buttons to highlight Remove
Paper and press the Z button.
If On is selected for Roll Paper Remaining, the
printer will automatically print a barcode.
C
The paper will automatically be rewound.
Once the paper is rewound, the printer will
display Press
and load paper.
Note:
When the display shows Turn roll paper adapter
to wind up roll paper, open the roll paper cover and
rewind the paper by hand.
Basic Operations
D
Open the roll paper cover.
Note:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.
E
Raise the roll lock lever.
F
Holding the paper by the roll adapters, move the
roll to the roll rest.
28