Saving Print Jobs To The Hard Disk Unit - Epson SureColor SC-T3000 User Manual

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Note:
Held print jobs can be saved if On is selected for
Store Held Job in the control panel Setup menu.
The factory default setting is Off.
"Setup menu" on page 107
U
• Viewing and Printing Stored Jobs
Print jobs can be stored on the hard disk unit and
printed at a later date.
Print jobs selected for printing at a later date can be
printed directly from the hard disk unit without
increasing the load on your computer.
Print jobs are saved using the printer driver. U
"Saving Print Jobs to the Hard Disk Unit" on
page 56
Note:
❏ Enlarged copy print jobs created with a
scanner attached to the printer can not be
saved to the hard disk unit.
❏ Jobs printed from the following applications
are always saved to the hard disk unit.
For information on other applications, see the
software documentation or online help.
❏
LFP Print Plug-In for Office
❏
EPSON CopyFactory5
Saving Print Jobs to the
Hard Disk Unit
This section describes the print driver settings used to
save print jobs.
Using the Optional Hard Disk Unit
A
B
56
When you have created the data, click Print in
the File menu.
After confirming that the printer is selected, click
Printer properties or Properties to display
printer settings.