Setting The Address Manually - Epson AcuLaser CX16 Reference Manual

Setting the Address Manually

You may also manually change the machine's IP address, subnet mask, and gateway by using the
following instructions. (See "Understanding the Network Setting Menu" on page 37 for more
information.)
Note:
When the IP address is changed, add a new port or reinstall the printer driver.
Caution:
c
You should always notify your network's administrator before changing the machine's IP address.
1. Turn on your PC and machine.
2. After the machine's message window is initialized, set the IP address.
Press this key . . .
d
d
d
d
d
(until) the message window displays . . .
UTILITY
MACHINE SETTING
ADMIN. MANAGEMENT
Use the keypad to input 6-digits administrator number.
ADMINISTRATOR NO.
NETWORK SETTING
TCP/IP
IP ADDR. SETTING
r AUTO
SPECIFY
AUTO
r SPECIFY
IP ADDRESS
:0.0.0.0
AcuLaser CX16NF Reference Guide
Network Printing 44