Epson AcuLaser CX16 Reference Manual page 77

For FTP Server
The Scan - Speed Dial Setting of speed dial registration (for FTP server) window allows you to
configure the following items:
Note:
The Network - FTP screen, set to "Enable" from Send when sending to FTP server. Also, when sending
via proxy server, specify the proxy server setting. For details, refer to "FTP" on page 108.
Item
File Destination
Description
Destination Name Specify the name of the destination.
Range
FTP Server Address Specify the destination of IP address for FTP server. When using DNS
server, host name can be specified instead of IP address.
Range
Directory Specify the destination directory on the FTP server.
Range
Use Proxy Select whether or not to use a proxy server to access the FTP server.
Choices
Default
Remote Port Number Specify the number of the port for the FTP server when a proxy server
is not specified.
Range
Default
AcuLaser CX16NF
Up to 20 characters
Up to 64 characters
Up to 128 characters
On, Off
Off
1 to 65535
21
Using Web-Based EpsonNet Config
Reference Guide
77