Programming/Editing A Group Dial - Epson AcuLaser CX16 Reference Manual

Programming/Editing a Group Dial

The following procedure describes how to edit or delete a group dialing program.
Note:
Program group dialing after programming speed dial numbers.
Add or delete destinations from group dialing by changing the settings for the registered speed dial
destinations. For details, refer to "Editing a Speed Dial Number" on page 30.
1. Click beside "Dial Registration", and then click
2. From the tree that is displayed, click the group name to be edited.
Note:
❏ Click
beside the group name, and then displays the speed dial number that registered in the
group.
❏ A maximum of 20 group dial can be programmed.
❏ A maximum of 50 speed dial numbers can be programmed.
3. Click Edit button.
Note:
If a speed dial number in a group is selected, the registered information for the speed dial number can
be changed. For details, refer to "Editing a Speed Dial Number" on page 30.
AcuLaser CX16NF
beside the "Group Dial".
Using Local Setup Program
Reference Guide
31