Scan A Document With The Scanner Driver - Canon imageCLASS D530 Basic Operation Manual

50

Scan a Document with the Scanner Driver

If you use the scanner driver window (ScanGear MF Window), you can use various features
and scan only the necessary part with the preview function.
1
Place your documents (
2
Switch to the Scan mode (
3 ▲
▼
Press [ ] or [ ] to highlight <Remote Scanner>, and then press [OK].
4
From your computer, double-click the [Canon MF Toolbox 4.9] icon.
5
When the MF Toolbox appears, click the desired scan mode button.
•
You may not use the ScanGear MF when using the [OCR] mode.
6
When the scan setting window appears, select the [Display the Scanner
Driver] check box, and then click [Start].
7
Select [Preview] on the scanner driver dialog box, and then specify
settings as needed.
You can preview the
image applied to the
scan setting values.
8
Click [Scan] to start scanning.
•
When scanning is complete, the folder in which the scanned document is saved
opens automatically.
•
If an application is specifi ed, the scanned document will be opened in the
application.
9
When scanning is complete, click [
→
p.16).
→
p.13).
Crops the borders detected in the preview image.
Deletes the selected cropping frames.
Rotates the image 90 degrees to the left.
Rotates the image 90 degrees to the right.
] to close the MF Toolbox.
Specify various
scanner settings
on each tab.