End Time; Clock; Childproof Lock; Switching On The Childproof Lock - Bosch HBM13B251B Instruction Manual

End time

You can delay the time at which you wish your dish to be ready.
The ó main oven starts automatically and finishes at the
desired time. You can, for example, put your dish in the
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example shown below: It is 10:30 , the cooking time is
45 minutes and the main oven is required to finish cooking at
12:30.
Turn the function and temperature selector to set the heating
1.
type and temperature for the main oven.
Press the 0 button twice.
2.
Use the @ or A button to set the cooking time.
3.
Press the button. The brackets are around
0
4.
when the dish will be ready is displayed.
Use the button @ or A to delay the end time.
5.
After a few seconds, the oven adopts the settings and
switches to standby. The display shows the time at which the
dish will be ready and the
symbols U and 0 go out. When the main oven starts, the
cooking time counts down in the display and the
shown in brackets. The

Childproof lock

The main oven has a childproof lock to prevent children from
ó
switching it on by accident or changing a setting.
The main oven does not respond to any settings. You can still
set the clock and the timer when the childproof lock is
activated.
If the heating type and temperature or grill setting are set for the
main oven, the childproof lock interrupts the heater element.

Switching on the childproof lock

No cooking time or end time may be set.
Press and hold the D button for approximately 4 seconds.
The D symbol appears in the display. The childproof lock is
activated.
. The time
p
symbol is in brackets. The
p
r
p symbol goes out.
The cooking time has elapsed
A signal sounds. The main oven stops heating. 00:00 is shown
in the display. Press the
used to set a new cooking time. Or press the
and turn the function and temperature selector to the off
position. The main oven is switched off.
Changing the end time
Use the or
@
seconds, the change is adopted. If the timer has been set, first
press the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the A button to set the end time back to the current time.
After a few seconds, the change is adopted. The main oven
starts. If the timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
clock, press the
around the relevant symbol. The display shows the value for a
few seconds.

Clock

After the appliance is connected or following a power cut, the
0 symbol and four zeros flash in the display. Set the clock.
Press the
1.
The clock in the display shows 12:00. The time symbols light
up and the brackets are around
Use the
@
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the
1.
The time symbols light up in the display and the brackets are
around
0
Use the @
2.
After a few seconds, the time that has been set is adopted.
symbol is
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.

Switching off the childproof lock

Press and hold the
The symbol in the display goes out. The childproof lock is
D
deactivated.
button. The
0
button to change the end time. After a few
A
button twice. Do not change the end time if the
U timer, r cooking time,
0 button repeatedly until the brackets are
button.
0
.
0
or button to set the clock.
A
button four times.
0
.
or A button to change the clock.
button for approximately 4 seconds.
D
or buttons can be
@ A
button twice
0
button twice.
0
p end time or 0
11