End Time; Clock - Bosch HBM43B250B Instruction Manual

Changing the cooking time
Use the or button to change the cooking time. After a few
@ A
seconds, the change is adopted. If the timer has been set,
press the button beforehand.
0
Cancelling the cooking time
Use the button to reset the cooking time to 00:00. After a few
A
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the U timer, r
clock, press the 0 button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.

End time

You can delay the time at which you wish your dish to be ready.
The ó main oven starts automatically and finishes at the
desired time. You can, for example, put your dish in the
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example shown below: It is 10:30 , the cooking time is
45 minutes and you want the oven to finish cooking at 12:30.
Set the function selector for the main oven.
1.
Set the temperature selector for the main oven.
2.
Press the button twice.
0
3.
Use the or button to set the cooking time.
@ A
4.
Press the button. The brackets are around
0
5.
when the dish will be ready is displayed.
Use button or to delay the end time.
@ A
6.
After a few seconds, the oven adopts the settings and
switches to standby. The display shows the time at which the
dish will be ready and the
symbols and go out. When the oven starts, the cooking
U 0
time counts down in the display and the
in brackets. The symbol goes out.
p
button
0
cooking time, p end time or
. The time
p
symbol is in brackets. The
p
r symbol is shown
The cooking time has elapsed
A signal sounds. The main oven stops heating. 00:00 is shown
in the display. Press the
used to set a new cooking time. Or press the
and turn the function and temperature selector to the off
position. The main oven is switched off.
Changing the end time
Use the or
@ A
seconds, the change is adopted. If the timer has been set, first
press the button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the A button to set the end time back to the current time.
0
After a few seconds, the change is adopted. The main oven
starts. If the timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
clock, press the
around the relevant symbol. The display shows the value for a
few seconds.

Clock

After the appliance is connected or following a power cut, the
0 symbol and four zeros flash in the display. Set the clock.
Press the
0
1.
The clock in the display shows 12:00. The time symbols light
up and the brackets are around
Use the or
@
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the
0
1.
The time symbols light up in the display and the brackets are
around .
0
Use the @ or
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
button. The
0 @
button to change the end time. After a few
U timer, r cooking time,
0 button repeatedly until the brackets are
button.
.
0
button to set the clock.
A
button four times.
A button to change the clock.
or buttons can be
A
button twice
0
button twice.
0
p end time or 0
11