Tv Components; Front; Side - Dynex DX-LCD32-09 User Manual

4
• Do not leave your TV in a hot or cold location. Also, do not
leave your TV in a location exposed to direct sunlight or near
a heater. This may cause the cabinet to warp and the screen
to malfunction.
• Storage temperature: 32° to 122°F (0° to 50°C)
• Working temperature: 41° to 104°F (5° to 40°C)
26 After image—Do not allow a still picture to be displayed for an
extended period, because this can cause a permanent
after-image to remain on the screen. Examples of still pictures
include logos, video games, computer images, teletext, and
images displayed in 4:3 mode. This background image is
viewable on normal programs in the form of a stationary fixed
image. This type of irreversible screen deterioration can be
limited by observing the following:
• Reduce the brightness and contrast settings to a minimum
viewing level.
• Do not display the fixed image for extended periods of time.
• Turn off the power when not in actual use.
Cautions: The permanent after-image on the screen resulting from fixed
image use is not an operating defect and is not covered by the
warranty. your TV is not designed to display fixed images for extended
periods of time.

TV components

Front

# Component
1 Power indicator
2 Remote control
sensor
Description
Lights when your TV is plugged
into a power outlet.
This indicator is green when
your TV is on and red when your
TV is in Standby mode.
Receives signals from the
remote control. Do not block.

Side

# Component
1
CH / CH
2
VOL / VOL
3 MENU
4 INPUT
5
(power)
TV components
CH
CH
VOL
VOL
MENU
INPUT
Description
Press to go to the next or
previous channel.
Press to increase or decrease the
volume.
Press to open the on-screen
menu.
Press to open the Input Source
menu, press CH or CH to
select the source, then press
VOL to confirm. You can select
TV, AV, S-Video, Component1,
Component2, HDMI1, HDMI2,
or VGA.
Press to turn on your TV. Press
again to enter standby mode.