Connecting An Hdmi Device; Connecting A Component Video Device; Connecting A Computer - Dynex DX-LCD32-09 User Manual

8

Connecting an HDMI device

You can connect two HDMI devices.
To connect an HDMI device:
• Connect an HDMI cable to the HDMI 1 or HDMI 2 jack on the
back of your TV and to the HDMI Out jack on the HDMI device.
Note: If you want to connect a DVI device, use a DVI-to-HDMI adapter
cable to connect the device to the HDMI 1 or HDMI 2 jack, then
connect an audio cable to the VGA AUDIO IN jack.
To play from an HDMI device:
1 Turn on your TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select HDMI1 or HDMI2, then press ENTER.
Note: You can press HDMI once to select HDMI1 or twice to select
HDMI2.
3 Turn on the HDMI device, then set it to the correct mode. See the
documentation that came with the device for instructions.

Connecting a component video device

You can connect two component video devices.
To connect a component video device:
• Connect a component video cable to the COMPONENT IN 1 or
COMPONENT IN 2 jacks on the back of your TV and to the
Component Out jacks on the component video device.
Audio cable
HDMI cable
HDMI device
Component video cable
To play from the component video device:
1 Turn on your TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select COMPONENT1 or COMPONENT2, then
press ENTER.
Note: You can press COMP once to select COMPONENT1 or twice to select
COMPONENT2.
3 Turn on the component video device, then set it to the correct
mode. See the documentation that came with the device for
instructions.

Connecting a computer

You can use your TV as a computer monitor.
Note: When the computer goes into standby mode, your TV turns off. If
your TV does not turn on when you "wake" your computer, press the
POWER button on your TV or remote control.
To connect a computer:
1 Connect a VGA cable to the VGA PIC jack on the back of your TV
and to the VGA jack on the computer.
2 Connect an audio cable to the VGA AUDIO jack on the back of
your TV and to the Audio Out jack on the computer.
To use your TV as a computer monitor:
1 Turn on your TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the display properties, if
necessary.
Setting up your TV
VGA cable Audio cable