Asus Rampage III GENE User Manual page 98

CPU Ratio Setting �Auto�
Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency.
Use the <+> and <-> keys to adjust the value. The valid value ranges differently
according to your CPU model.
C1E Support �Disabled�
[Enabled]
[Disabled]
Hardware Prefetcher �Enabled�
[Enabled]
[Disabled]
Adjacent Cache Line Prefetcher [Enabled]
[Enabled]
[Disabled]
Intel(R) Virtualization Tech �Enabled�
[Enabled]
[Disabled]
CPU TM Function �Enabled�
[Enabled]
[Disabled]
Execute Disable Bit �Enabled�
[Enabled]
[Disabled]
Intel(R) HT Technology �Enabled�
[Enabled]
[Disabled]
Active Processor Cores �All�
[All]
[1]
[2]
3-24
Enables the C1E support function. This item should be enabled in
order to enable the Enhanced Halt Sate.
Disables this function.
Enables the Hardware Prefetcher function. This item should
be enabled in order to enable the L2 cache (MLC) Streamer
Prefetcher for tuning performance of the specific application.
Disables this function.
Enables the Adjacent Cache Line Prefetcher function. This item
should be enabled in order to enable the L2 cache (MLC) Spatial
Prefetcher for tuning performance of the specific application.
Disables this function.
Allows a hardware platform to run multiple operating systems
separately and simultaneously, enabling one system to virtually
function as several systems.
Disables this function.
Enables the overheated CPU to throttle its clock speed to cool
down.
Disables this function.
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
Enables the Intel Hyper-Threading Technology.
Only one thread per activated CPU core is enabled.
Activate all CPU cores in the processor package.
Activate only 1 CPU core in the processor package.
Activate 2 CPU cores in the processor package.
Chapter 3: BIOS setup