Acpi Apic Support [Enabled]; Eup Ready [Disabled]; Apm Configuration - Asus Rampage III GENE User Manual

3.6.4 ACPI APIC Support �Enabled�
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).
[Disabled] When set to [Disabled], the system disable the Advanced
Configuration and Power Interface (ACPI) support in the Advanced
Programmable Interrupt Controller (APIC).
[Enabled] When set to [Enabled], the ACPI APIC table pointer is included in
the RSDT pointer list.
3.6.5 EuP Ready �Disabled�
[Disabled] Disables the Energy Using Products (EuP) Ready function.
[Enabled] Allows BIOS to switch off some power at S5 state to get system
ready for the EuP requirement. When set to [Enabled], power for
WOL, WO_USB, audio and onboard LEDs will be switched off at
S5 state.
�.�.�

APM Configuration

Rampage III GENE BIOS SETUP
Advanced
APM Configuration
Restore on AC Power Loss
Power On By RTC Alarm
Power On By PCI Devices
Power On By PCIE Devices
Power On By PS/2 Keyboard PS/2 Keyboard
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Restore On AC Power Loss �Power Off�
[Power Off] The system goes into off state after an AC power loss.
[Power On] The system goes into on state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
ROG Rampage III GENE
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled] [Disabled]
Version 0206
Options
Power Off
Power On
Last State
←→ Select Screen
↑↓ Select Item
+- Change Options
F1 General Help
F10 Save and Exit
ESC Exit
3-35