Asus Rampage III GENE User Manual page 102

Onboard 1394 Controller �Enabled�
[Enabled]
[Disabled]
Marvell SATA6G Controller �IDE Mode�
[Disabled]
[IDE Mode]
[AHCI Mode]
Onboard USB 3.0 Controller �Enabled�
[Enabled]
[Disabled]
3-28
Enables the onboard 1394 Controller.
Disables the controller.
Disables the Marvell SATA6G controller.
Set to [IDE Mode] when you want to use the Serial ATA hard disk
drives as Parallel ATA physical storage devices.
Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advabced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
Enables the onboard USB 3.0 Controller.
Disables the controller.
Chapter 3: BIOS setup