Extreme Tweaker Menu - Asus Rampage III GENE User Manual

3.3

Extreme Tweaker menu

The Extreme Tweaker menu items allow you to configure overclocking-related
items.
Take caution when changing the settings of the Extreme Tweaker menu items.
Incorrect field values can cause the system to malfunction.
The default values of the following items vary depending on the CPU and
memory modules you install on the motherboard.
Rampage III GENE BIOS SETUP
Extreme Tweaker Main Advanced Power Boot Tools Exit
Configure System Performance Settings
Target CPU Frequency: 2793MHZ
Target DRAM Frequency: 1066MHZ
QPI Loadline Calibration: Disabled
Tuning Mode
CPU Level Up
-------------------------------------------------
Ai Overclock Tuner
CPU Ratio Status:(Min:12, Max:63)
CPU Ratio Setting
CPU Turbo Power Limit
CPU Configuration
DRAM Frequency
UCLK Frequency
QPI Link Data Rate
Memory Configuration Protect
DRAM Timing Control
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Scroll down to display the following items:
EPU II Phase Control
CPU Loadline Calibration
CPU Differential Amplitude
IOH Voltage OCP
DRAM Voltage OCP
QPI Voltage OCP
--- Please key in numbers or select voltage!---
Extreme OV
CPU Temperature: 20˚C/122˚F
CPU Voltage Control
CPU Voltage 1.230 [Auto]
CPU PLL Voltage 1.812 [Auto]
QPI/DRAM Core Voltage 1.151 [Auto]
NB/SB Temperature: 47˚C/116.5˚F
IOH Voltage 1.111 [Auto]
IOH PCIE Voltage 1.508 [Auto]
ICH Voltage 1.111 [Auto]
ICH PCIE Voltage
DRAM Bus Voltage 1.601 [Auto]
DRAM REF Voltages
******** Spread Spectrum Control ********
CPU Spread Spectrum
PCIE Spread Spectrum
CPU Clock Skew
IOH Clock Skew
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
ROG Rampage III GENE
[Extreme OC]
[Auto]
[Auto]
[Auto]
[Disabled]
[Auto]
[Auto]
[Auto]
[Disabled]
[Full Phase]
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Absolute (VID)]
61˚C/141.5˚F
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Version 0213
Sync mode
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3-9