Layout Contents - Asus Rampage III GENE User Manual

2.2.2

Layout contents

Connectors/Jumpers/Switches/Slots
1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2. LGA1366 CPU Socket
3. DDR3 DIMM slots
4. CPU, chassis, and optional fan connectors (4-pin CPU_FAN;
4-pin CHA_FAN1–2; 4-pin PWR_FAN; 4-pin OPT_FAN)
5. Marvell
6. ICH10R Serial ATA connectors (7-pin SATA1–6 [grey])
7. System panel connector (20-8 pin PANEL)
8. QPI_LL (3-pin QPI_LL_SW)
9. Clear RTC RAM (3-pin CLRTC_SW)
10. USB connectors (10-1 pin USB78; USB910)
11. Reset switch
12. Power-on switch
13. GO button
14. IEEE 1394a port connector (10-1 pin IE1394_2)
15. Front panel audio connector (10-1 pin AAFP)
16. Digital audio connector (4-1 pin SPDIF_OUT)
17. Thermal sensor cable connector (2-pin OPT_TEMP)
Refer to 2.7 Connectors for more information about rear panel connectors and
internal connectors.
2-8
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [red])
®
Chapter 2: Hardware information
Page
2-40
2-10
2-15
2-38
2-34
2-33
2-41
2-28
2-27
2-35
2-43
2-43
2-44
2-36
2-37
2-36
2-39