Bluetooth Module - HP 325 - Notebook PC Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part number is 537921-001 and is used in all countries and
regions except Japan and Asia Pacific countries and regions. The Bluetooth module cable is included
in the Cable Kit, spare part number 605793-001. See
part number information.
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the palm rest (see
6. Remove the keyboard (see
7. Remove the top cover (see
Remove the Bluetooth module on 39.6-cm (15.6-in) computers:
1. Position the computer right-side up with the front toward you.
2. Disconnect the Bluetooth cable (1) from the system board and remove the antenna (2) from the
base enclosure. The antenna is held to the base enclosure with adhesive.
Remove the Bluetooth module on 35.6-cm (14.0-in) and 33.8-cm (13.3-in) computers:
1. Position the computer right-side up with the front toward you.
78 Chapter 4 Removal and replacement procedures
Battery on page 48).
Palm rest on page 64).
Keyboard on page 67).
Top cover on page 71).
Cables on page 31 for more Cable Kit spare