Palm Rest - HP 325 - Notebook PC Maintenance And Service Manual

Palm rest

Description
Palm rest for Compaq brand units with 33.8-cm (13.3-in) displays (includes TouchPad, TouckPad
board, and 2 cables)
Palm rest for Compaq brand units with 33.8-cm (13.3-in) displays (includes TouchPad, TouchPad
board, and 2 cables), Red
Palm rest for HP brand units with 39.6-cm (15.6-in) displays (includes TouchPad, TouchPad
board, and 2 cables)
Palm rest for HP brand units with 35.6-cm (14-in) displays (includes TouchPad, TouchPad board,
and 2 cables)
Before removing the palm rest, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
Remove the palm rest on 39.6-cm (15.6-in) computers:
1. Position the computer right side up with the display open.
2. Pull up (1) on the top edge of the palm rest nearest the keyboard. With the palm rest at an angle,
slide the unit (2) to release the latches at its base.
64 Chapter 4 Removal and replacement procedures
Battery on page 48).
Service door on page 49).
Spare part number
605779-001
616602-001
605782-001
605780-001