HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note page 8

Description
In a blade switch fabric, an invalid attachment is not shown on
McDATA switch port. If there is an invalid attachment between 2
ports, one on a switch blade and one on a McDATA switch, the
invalid attachment is not displayed on the McDATA switch port.
Switches may show in the same fabric with no visible connection (if
physical connection method is not supported).
Browse user may be able to delete a Group log.
The Copy, Delete, Delete All options may be enabled for a read
access user.
An application may not gather active zone sets from HAFM 7.1 if
invalid port number is discovered.
HAFM as well as EWS are labeling port names as node names.
In the HAFM Security tab, HAFM is labeling device port names as
node names.
Cannot import a zone set with more than 2048 members.
All domain IDs in a fabric do not get displayed in product view.
HAFM 8.9. management of Directors and Edge Switches and
Directors running firmware 6.x or earlier, does not display the
port state correctly in various parts of the Element Manager:
1. Product/Fabric View: Ports that are logged-in
intermittently appear and vanish from view.
2. Performance View: Ports with established I/O do not
display the green bars or water marks. The performance
tables do not update port status after a requested "refresh".
3. Port Card view identifies all ports as "failed", with
flashing red diamond. All of the ports may be operational.
4. Node List: With devices attached, the node list fails to
populate to reflect device attachments.
Export successful message displays without any file name and path.
No CTA event is logged in Threshold Alert log.
FC Address field in Node List View cannot be sorted on all 3 bytes of
the port Address. HAFM sorts on the Domain/Area fields of the Port
Address only, not on the Port field.
When an Element Manager launch is attempted after IP address
is swapped between the Sphereon 4500 Fabric Switch and the
Sphereon 4700 Fabric Switch, an error message Invalid Product Type
is displayed for Sphereon 4700 Fabric Switch.
Users can enable the insistent domain ID feature when the preferred
domain ID and current domain ID do not match.
Users can enable the preferred path feature when the active domain
ID and the preferred domain ID do not match.
Switch Blades and SANtegrity: Cannot activate Fabric Mode on a
switch blade-only fabric mixed-fabric in Open Systems mode.
Switch Blade and Enterprise Fabric Mode: When attempting to
deactivate Switch Binding with Enterprise Fabric Mode enabled, no
message displays. A message should display stating that switch
binding cannot be deactivated while Enterprise Fabric Mode is
enabled.
8
Problem Category
McDATA 4Gb SAN switches
Topology
User Management
User Management
Zoning
User Management
Zoning
Display
Display/Layout/GUI
Export
Element Manager
Element Manager
Element Manager
Element Manager
Element Manager
Enterprise Fabric Mode
Enterprise Fabric Mode