Download Print this page

HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note page 16

Hp storageworks ha-fabric manager release notes, v08.09.01 (aa-rur6j-te, october 2006)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:

Advertisement

Workaround
If this condition persists, it may be necessary to reboot the HAFM appliance. This is not disruptive to
managed switches, but monitoring and logging functions are interrupted while the appliance is rebooting.
Disabled Show Route/Hide Route menu item
The the Show Route menu item, from the Right-click on a port in the Product Tree, is disabled (grayed out)
after installing HAFM on an HAFM Appliance that has not previously had HAFM installed. For example,
installing on a restored HAFM Appliance or a replacement HAFM Appliance.
Workaround
Activate or reactivate the zoneset to enable the Show Route menu item, making it available from the
Right-click menu.
Fibre Channel Logical Address error in the Zoning dialog box
The Fibre Channel Logical Address may appear as 000000 on the zoning panel.
Workaround
Restart the HAFM client to display the correct Fibre Channel Address.
Unconnected ports showing different speeds
In the Port List View, unconnected ports may show speeds different than what has been configured.
Workaround
Restart the HAFM client to display the correct speed.
Inaccurate Node Descriptor information
Node Descriptor information in the Node Properties dialog may occasionally be inaccurate.
Workaround
Restart the HAFM client to display the correct information.
HAFM client for Solaris does not respond to short cut keys
When using the HAFM client for Solaris, the client application does not respond to a small number
of shortcut keys.
Workaround
Choose one of the following workarounds:
You may use an HAFM client for a different operating system.
For those shortcuts that are not available, you must use the mouse.
Node Nickname does not appear in Port Properties dialog box
The Attached Port WWN field of the Port Properties dialog box does not display the nickname of the
attached device if there is one configured to it.
Workaround
The nickname for the Attached Port WWN can be observed from the Node Properties dialog box.
16

Advertisement

loading